Galley seating area (shows options)
Typical double bunk (shows options)
Main Cabin looking aft (shows options)
Some Examples
for representation purposes
Galley and aft cabin (shows options)
TIKI 38 Or, we can build it for you - Read below
TIKI 38 Basic Boat & Building Details
The boat will be built with only the highest quality materials. You may have preferences over choices listed below, but we will not compromise on quality. So long as what you wish is comparable in quality to our choices, I will not have any problem making a change. Some of the material choices made are also based on weight considerations and will not be changed. The TIKI design can have long life if built with quality materials, and rot can be eliminated from typical prone areas by maintaining high standards for materials and workmanship. There are also no tropical BUGS to worry about infesting the lumber since we build in temperate climates and use North American lumber from cool climates.
 
1 The Hulls, Decks and Cross Beams will be constructed of Meranti or Douglas fir ply and Douglas fir or quality pine lumber of the highest quality available.  Hull exterior, decks, and cross beams to be laminated and sealed with high quality epoxy and glass cloth, faired, and painted with 2-3 coats of 2-part polyurethane paint of a light color as per plans.
2 Interior lay-out as per plans. Navigation lights, wiring, and small 12V (24V optional) battery system with 10W solar support is included. Interior to be painted with quality water-based latex or left with epoxy coating exposed. Polyurethane paint or Varnish is optional.
3 Deck and cockpit - Decks: Wharram design slatted deck of treated douglas fir or pine, fastened with stainless steel machine screws, will cover the balance of the deck area between the hulls to include forward mast-step/tabernacle with single boarding ramp at stern. Deck cockpit as per plan or reversed per Wharram design approval.
4 Tiki Wingsail Schooner standing rig will be standard with Harken roller furling. Masts will be round aluminum as per Wharram specification. Stainless steel wire stays will attach to hardwood rigging cleats at hull-sides with pre-stretched polyester rope lanyards. Dacron wingsails, head sail, storm sail, and Harken or similar running rigging.

Call for current Tiki 38 pricing and delivery schedule.

OPTIONS available (all highest quality marine grade equipment):
Installed Twin Outboard Engines: 4-stroke 9.9 hp XL shaft gas engines with fuel tanks and remote controls, electrical, start battery, etc.
Installed Basic Electrical system: Lifeline AGM batteries, main battery switch, circuit breaker panels, electrical system, wiring, and cables, LED lights and fans in all cabins, galley and head
Installed Navigation Instruments: Combined log/speed/depth sounder, wind instruments, integrated GPS system, integrated auto pilot system, VHF radio, Radar system, Digital compass
Installed LED Navigation/Anchor lights/compasses - includes installation of wiring, circuits, and mast work
Other electrical charging options: Solar panels, regulators, wind generator, water generator, DC generator, AC generator
Installed Watermakers (1.6 gph and up to 40 gph - AC, DC, or Engine Driven)
Installed Head/Plumbing/Fixtures - Lavac head, Hot and Cold pressure water, water heater, holding tank(s), water tank (s), plumbing, deck fill(s), fixtures, shower, drain system, thruhull(s), seacock(s), strainer(s), etc.
Installed Galley - SS 2-burner propane stove with oven, 12V refrigerator/freezer, propane tank, hoses, fittings, plumbing, Hot and Cold pressure water system, water tank(s), sink, fixtures, deck fill(s), thruhull(s), seacock(s), strainer(s), etc.
Installed Ventilation Package -  6 Positive solar vents, 6 passive vents, 14 opening ports
Basic Anchor/Docking system - 2 Anchors, 400’ rode, 100’ chain, 8 spliced loop dock lines, 8 fenders, boat hook, swivels, shackles, etc.
Dingy/Tender - Custom built, Plans built, RIBs, others, with or without engines
Cushions, Linens, etc - interior, exterior
Canvas work: Sunbrella cockpit cover on stainless steel tubing frames with see-through panels, Dodger on stainless steel tubing frames to give shelter from wind and spray, Canvas Bimimi over cockpit seating unit at height to give standing headroom, fitted to stainless steel frame
Full commissioning service
Worldwide Delivery

Upgrades to most options are always available. Substitutions are allowed in most cases. There are many more options available, these are the most commonly requested. We can also supply options kits, and completions kits for boats that you are building yourself. Please inquire with your requirements.
At anchor (shows options)
 
Budget Boater™ an Unlimited Company
 
Copyright 2007 Unlimited and Budgetboater.com™ all rights reserved
 
 
Order Study Plans from the Designer
now available
TIKI 38 Boat Finishing Kits

Finishing kits are available for your build or to add to our boat kit: engines (or complete hybrid diesel-electric drive), electrical kits (solar and wind power charging available), navigation equipment kits, head and plumbing kits, galley kits, & positive ventilation kits - All kits have the highest quality materials. options and substitutions are available. email us with your requirements.

*due to economic forces beyond our control, prices are subject to change without notice. Price does not include packaging and shipping charges to your location.
mailto:Builder@budgetboater.com?subject=Finishing%20Kit%20Inquiryshapeimage_3_link_0